|
This file contains information on installing, building and using omniORB2 on Unix platforms.
If you are upgrading from 2.2.0, do not miss the important information about omniNames at the end of this note.
Unless specified otherwise, the information applies to all Unix platforms. Linux users should also consult the file README.Linux . Users intending to use egcs should also read README.egcs.
omniORB2 has been tested on the following Unix platforms:
- Solaris 2.{5,6}/ Sun SparcCompiler C++ version 4.2
- Linux 2.0 (x86)/ GNU C++ compiler version 2.7.2 /libc-5/Linuxthreads 0.5
- Linux 2.0 (x86)/egcs-1.1.1/binutils-2.9.1.0.14/GNU Libc version 2
- Digital Unix 3.2/ DEC C++ compiler version 5.5
- Digital Unix 4.0D/ DEC C++ compiler version 6.0
It has also been tested by external contributors on the following platforms:
- IBM AIX 4.2/ IBM C Set++ 3.1.4
- HPUX 10.20/ aC++ (B3910 A.01.04)
- NextStep 3.3/ gcc-2.7.2
- Reliant Unix 5.43/CDS++
- SCO OpenServer 5/g++
- SGI Irix 6.x/SGI C++ compiler 7.2
Roadmap
The directory structure of this distribution looks as follows:
- <Top-Level Directory>\ : Directory where distribution was unpacked
- <Top-Level Directory>\doc\ : omniORB2 Documentation
- <Top-Level Directory>\include\ : Include files
- <Top-Level Directory>\include\omniORB2\ : Include files for ORB run-time library
- <Top-Level Directory>\include\omnithread.h : Main omnithread include file
- <Top-Level Directory>\include\omnithread\ : Include files for thread library
- <Top-Level Directory>\src\ : Source files
- <Top-Level Directory>\src\lib\omniORB2\ : Source files for ORB run-time libraries
- <Top-Level Directory>\src\lib\omnithread\ : Source files for thread library
- <Top-Level Directory>\src\tool\omniidl2\ : Source files for IDL Compiler
- <Top-Level Directory>\src\appl\omniNames\ : Source files for COS Naming Service
- <Top-Level Directory>\src\appl\utils\ : Source files for utilities
- <Top-Level Directory>\src\examples\ : Source for example programs
Configuration
- Select the appropriate platform configuration file
Edit ./config/config.mk to select the appropriate platform file.
e.g. For Solaris 2.5 onwards and with Sunspro C++
platform = sun4_sosV_5.5
All the platform files are in ./mk/platforms.
- Building and installing
The makefiles in this distribution only works with GNUmake. Make sure that you have the program installed and invokes it directly.
You can skip this step if this is a pre-compiled binary distribution. To build and install everything,
- go into the directory ./src and type 'make export'.
- If all goes well, the libraries and executables will be installed into ./lib/<platform>/ and ./bin/<platform>/.
- Add omniORB2 libraries to search path
Since the shared libraries libomniORB2.so and libomnithread.so are not in the directories searched by the dynamic loader by default, you must add the library directory to the search path. For example on Solaris 2.5:
$ LD_LIBRARY_PATH=<absolute pathname of ./lib/sun4_sosV_5.5>
$ export LD_LIBRARY_PATH
- Configure the naming service
If you are upgrading from 2.2.0, please read the important information about omniNames at the end of this note.
You also have to configure the omniORB2 runtime and the naming service, consult the user guides in ./doc for details. For a quick start, follow these steps:
- Set the environment variable OMNINAMES_LOGDIR to a directory where the naming service omniNames can store its data.
For example:
OMNINAMES_LOGDIR=/wib/wob; export OMNINAMES_LOGDIR
- Start omniNames. The binary is in ./bin/<platform>/.
For example:
$ ./bin/sun4_sosV_5.5/omniNames -start 12345 &
Notice that you have to give as a parameter to the option -start the TCP/IP port number omniNames will use to receive IIOP requests.
- omniNames writes the stringified object reference for its root context on standard error. You should copy this string into a file omniORB.cfg. The format of the entry is the word NAMESERVICE followed by space and the stringified IOR all on one line. For example:
NAMESERVICE IOR:00fff71c0000002849444c3a6f6d672e6f726\
72f436f734e616d696e672f4e616d696e67436f6e746578743a312e\
300000000001000000000000002c0001000000000012776962626\
c652e776f62626c652e636f6d0004d20000000c34c35a8305a931a2\
00000001
- Since 2.6.0, an alternative way set up omniORB.cfg is as follows:
If omniNames has been started on host wobble and port 1234, add to omniORB.cfg the following lines:
ORBInitialHost wobble
ORBInitialPort 1234
Any omniORB2 clients of release 2.6.0 or later are able to use this information to locate the root context of the Naming Service.
- Set the environment variable OMNIORB_CONFIG to contain the full path name of the file omniORB.cfg. For example,
OMNIORB_CONFIG=/wib/wob/omniORB.cfg; export OMNIORB_CONFIG
Building the examples
You are strongly encouraged to try out the examples provided in ./examples.
- Go into ./examples and type 'make all'.
- Make sure that 'make' is GNUmake because the makefiles are all GNUmake specific.
- Study the documentations in ./doc before you run any of the example programs.
Writing your own Makefile
The distribution makefiles may be a bit much to digest. Here is a few tips of what to put into your makefiles to compile omniORB2 programs:
- Compiler flags:
To compile omniORB2 programs correctly, several C++ preprocessor defines must be specified to identify the target platform.
| Sun Solaris 2.5 |
__sparc__ __sunos__ __OSVERSION__=5 |
| Digital Unix 3.2 |
__alpha__ __osf1__ __OSVERSION__=3 |
| HPUX 10.x |
__hppa__ __hpux__ __OSVERSION__=10 |
| IBM AIX 4.x & |
__aix__ __powerpc__ __OSVERSION__=4 |
| Linux 2.0 (x86) |
__x86__ __linux__ __OSVERSION__=2 |
| SGI Irix 6.2 |
__mips__ __irix__ __OSVERSION__=6 |
| Reliant Unix 5.43 |
__mips__ __SINIX__ __OSVERSION=5 |
| NextStep 3.x |
__m68k__ __nextstep__ __OSVERSION__=3 |
- Libraries:
The runtime libraries that you have to link to your executables are:
- libomnithread.so - omnithread share library
- libomniORB2.so - omniORB2 runtime shared library
- libomniDynamic2.so - omniORB2 runtime shared library for dynamic features
- libomniLC.so - lifecycle service runtime shared library
- One of the following gatekeeper libraries:
- libtcpwrapGK.so - implemented using tcpwrapper
- libomniGK_stub.a - dummy stub.
Either link with -ltcpwrapGK or -lomniGK_stub but not both. (At the moment, only linux, solaris and digital unix have tcpwrapGK enabled.)
The name of the libraries may be have different suffixes on different platforms, you can figure it out.
- IDL compiler:
IDL stubs can be compiled like this:
omniidl2 echo.idl
The product is the files: echo.hh and echoSK.cc
Documentation
You must read the omniORB2 and the OMNI naming service user guides. Follow the instructions in the guides to complete the configuration process.
Important Change to omniNames for users upgrading from version 2.2.0
Since release 2.4.0, the naming service has used the prefix pragma "omg.org" in its IDL.
Unfortunately, this is not compatible on-the-wire with clients that are linked with the old library, i.e. any programs linked before version 2.4.0 was released.
The implications of this change are as follows:
- omniNames built in this release *CANNOT* read the data file of the version 2.2.0 omniNames. A new instance must be started from scratch. If you start omniNames and tell it to use the old data file, it will certainly crash.
- Possible migration path: At, we are running the old and the new omniNames in parallel. The new instance is setup to run on a different port. Also the new tree is built to read by default a different configuration file: (/project/omni/var/omniORB_NEW.cfg instead of /project/omni/var/omniORB.cfg) so that a client will pick up the IOR of the old or the new omniNames depending on whether it is compiled with the old or the new library. When all our services have been recompiled, the old omniNames will be withdrawn.
- If you want to continue to use the old omniNames, you can undo this change with the following steps:
- Edit <Top directory>\src\lib\omniORB2\Naming.idl and remove the #pragma prefix "omg.org" line..
- Do the same to <Top directory>\idl\Naming.idl.
- Remove <Top directory>\include\omniORB2\Naming.hh.
- Rebuild everything. You should do a make veryclean at the top of <Top directory>\src to make sure that the naming service stubs are regenerated.
Last minute news
- For the moment, connection screening using tcpwrapper is only available on linux, solaris and digital unix. The build process on other platforms still have to be sorted.
|
